Floor Box 3 or 4 Compartment 64mm Deep

Description

Floor Box 3 or 4 Compartment 64mm Deep

This 64mm Deep standard 3 or 4 compartment floor box is manufactured from galvanised steel and the frame and lid are moulded from high impact polycarbonate (Colour equivalent: RAL7031).

Each floor box has two dividing plates with a screw set included and can be configured to accept three or four floor box plates.

Floor Box Specification:

• Galvanised steel floor box and lid insert, load tested to 740 Kgs
• 25mm and 20mm knockouts to accept flexible conduit ( Note: 64mm deep box only has 20mm knockouts)
• ABS plastic frame and lid moulded from high impact polycarbonate (RAL7031), load tested to 550 Kgs
• Easy grip recessed lifting handle
• Clamp fixing for fast installation
• Suitable for carpeted floors only with standard Frame and Lid
• Clean Earth Sockets available
• Available in depths of 64mm | 76mm | 80mm | 86mm and 120mm

Floor Box Dimensions:

Floor Cut Out: 303 x 221mm

Overall Frame and Lid: 313 x 230mm. Frame Lid Recess: 6mm

Floor Box Depth          Plug Top Clearance

64mm                            27mm*

76mm                            25mm*

80mm                            30mm*

80mmRCD                   28mm    (RCD Compatible)

86mm                            36mm    (RCD Compatible)

120mm                          40mm    (RCD Compatible)

A range of floor box accessory plates is available to provide a variety of combinations of 3 or 4 compartments of power and data in any one floor box.

Use Plate Size 185 x 68mm for a four compartment configuration

Use Plate Size 185 x 89mm for a three compartment configuration

Plate Colour equivalent: RAL7035

*Note: Plates in the CF286 and CF287 range are not suitable for floor boxes below 80mm depth due to plug top and wiring clearance. RCD Sockets are suitable for CFB380-RCD and any other floor boxes greater than 80mm deep.

MPN: CFB364