Fibre Connectors
Fibre Connectors include field-fit fibre connectors and modular outlets for terminating fibre optic cable on site without a fusion splicer, covering LC, SC, ST and FC adaptor types for multimode and singlemode fibre.
Browse Fibre Connectors
Fibre connectors terminate fibre optic cable on site and present it as a usable connection point, without needing a fusion splicer for every job. This range covers field-fit connectors and modular outlets for network installers finishing fibre runs at the cabinet or the outlet.
Choosing a connector
- Adaptor type: FC Simplex, LC Duplex, LC QUAD, LC Simplex, SC Duplex, SC Simplex and ST Simplex, matched to the equipment or panel being connected.
- Fibre mode: multimode or singlemode, matched to the fibre cable already run.
- Fit method: cold cure connectors bond the fibre without heat or polishing equipment, useful where a splicer is not available on site.
See the Cold Cure Connectors and Fibre Modular Outlet ranges for specific fit types, or browse Fibre Patchcords and Fibre Optic Network Cabling for the rest of the run.
Fibre Connectors FAQs
What is the difference between a cold cure connector and a standard field-fit connector?
A cold cure connector bonds the fibre using an adhesive rather than heat, so it can be fitted on site without polishing equipment or a fusion splicer.
Which connector type do I need, LC, SC, ST or FC?
The adaptor type must match the port on the panel or equipment you are connecting to. This range stocks FC Simplex, LC Duplex, LC QUAD, LC Simplex, SC Duplex, SC Simplex and ST Simplex, so check the equipment spec before ordering.
Does it matter if I order a multimode or singlemode connector?
Yes. The connector must match the fibre mode already installed, either multimode or singlemode, as the two are not interchangeable on the same fibre run.